Planned Procedure - Definitions - Consolidated CDA (C-CDA) v4.0.0

This page is part of the CCDA: Consolidated CDA Release (v4.0.0: CCDA 4.0) generated with FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version. For a full list of available versions, see the Directory of published versions

Logical Model: PlannedProcedure - Detailed Descriptions

Draft as of 2025-06-20

Definitions for the PlannedProcedure logical model.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Procedure
Definition	Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. Base definition for all types defined in FHIR type system.
Short	Base for all types and resources
Control	10..1*
Is Modifier	false
Logical Container	ClinicalDocument (CDA Class)
Validation	Instance of this type are validated by templateId
XML Format	In the XML format, this property has the namespace `urn:hl7-org:v3`.
Invariants	should-text-ref-value: SHOULD contain text/reference/@value (`text.reference.value.exists()`) should-sdtcCategory: SHOULD contain sdtcCategory (`sdtcCategory.exists()`) should-effectiveTime: SHOULD contain effectiveTime (`effectiveTime.exists()`) should-author: SHOULD contain author (`author.exists()`)
2. Procedure.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
4. Procedure.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
6. Procedure.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
8. Procedure.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
10. Procedure.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
12. Procedure.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
14. Procedure.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
16. Procedure.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
18. Procedure.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Slicing	This element introduces a set of slices on `Procedure.templateId`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ root value @ extension
20. Procedure.templateId:planned-proc
Slice Name	planned-proc
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
22. Procedure.templateId:planned-proc.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
24. Procedure.templateId:planned-proc.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
26. Procedure.templateId:planned-proc.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
28. Procedure.templateId:planned-proc.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Pattern Value	`2.16.840.1.113883.10.20.22.4.41`
30. Procedure.templateId:planned-proc.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
Pattern Value	`2022-06-01`
32. Procedure.classCode
Comments	SHALL contain exactly one [1..1] @classCode="PROC" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-8568).
Control	1..1
Binding	The codes SHALL be taken from ActClassProcedure (required to `http://terminology.hl7.org/ValueSet/v3-ActClassProcedure`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`PROC`
34. Procedure.moodCode
Comments	SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (Act/Encounter/Procedure) urn:oid:2.16.840.1.113883.11.20.9.23 STATIC 2011-09-30 (CONF:4515-8569).
Control	1..1
Binding	The codes SHALL be taken from Planned moodCode (Act/Encounter/Procedure) (required to `http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.23`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
36. Procedure.id
Definition	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Short	Logical id of this artifact
Comments	SHALL contain at least one [1..*] id (CONF:4515-8571). Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.
Control	10..*1
Type	http://hl7.org/cda/stds/core/StructureDefinition/IIid
Is Modifier	false
38. Procedure.sdtcCategory
Control	0..*
Binding	The codes SHOULD be taken from US Core ServiceRequest Category Codes (preferred to `http://hl7.org/fhir/us/core/ValueSet/us-core-servicerequest-category`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
XML Format	In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`category`.
40. Procedure.code
Definition	Drawn from concept domain ActCode The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").
Short	Changed:𝗨𝗦𝗖𝗗𝗜: SDOH InterventionsIdentification of the procedure
Comments	This code SHALL contain exactly one [1..1] @code, which SHOULD be selected from ValueSet US Core Procedure Codes urn:oid:2.16.840.1.113883.4.642.40.48.31 .
Control	10..1
Binding	The codes SHOULD be taken from For example codes, see US Core Procedure Codeshttp://hl7.org/fhir/ValueSet/procedure-code (preferred to `http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CDCodeableConcept
Is Modifier	false
Requirements	0..1 to account for primarily narrative only resources.
Alternate Names	type
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Procedure.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
44. Procedure.text
Definition	A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
Short	SHOULD reference the portion of section narrative text corresponding to this entryText summary of the resource, for human interpretation
Comments	Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Control	0..1 This element is affected by the following invariants: dom-6
Type	http://hl7.org/cda/stds/core/StructureDefinition/EDNarrative
Is Modifier	false
Alternate Names	narrative, html, xhtml, display
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Procedure.text.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
48. Procedure.text.compression
Definition	Indicates whether the raw byte data is compressed, and what compression algorithm was used.
Control	0..1
Binding	The codes SHALL be taken from CDACompressionAlgorithm (required to `http://hl7.org/cda/stds/core/ValueSet/CDACompressionAlgorithm`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Compression
50. Procedure.text.integrityCheck
Definition	The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created.
Control	0..1
Type	base64Binary(bin: Binary Data)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Integrity Check
52. Procedure.text.integrityCheckAlgorithm
Definition	Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage.
Control	0..1
Binding	The codes SHALL be taken from IntegrityCheckAlgorithm (2.0.0) (required to `http://terminology.hl7.org/ValueSet/v3-IntegrityCheckAlgorithm\|2.0.0`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Integrity Check Algorithm
54. Procedure.text.language
Definition	For character based information the language property specifies the human language of the text.
Control	0..1
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Language
56. Procedure.text.mediaType
Definition	Identifies the type of the encapsulated data and identifies a method to interpret or render the data.
Control	0..1
Binding	For example codes, see MediaType (example to `http://terminology.hl7.org/ValueSet/v3-MediaType`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Media Type
58. Procedure.text.representation
Control	0..1
Binding	The codes SHALL be taken from CDABinaryDataEncoding (required to `http://hl7.org/cda/stds/core/ValueSet/BinaryDataEncoding`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
60. Procedure.text.xmlText
Definition	Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.)
Short	Allows for mixed text content. If @representation='B64', this SHALL be a base64binary string.
Comments	This element is represented in XML as textual content. The actual name "xmlText" will not appear in a CDA instance.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as unadorned text.
62. Procedure.text.reference
Definition	A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/TEL
Label	Reference
Invariants	value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (`value.exists() implies value.startsWith('#')`)
64. Procedure.text.thumbnail
Definition	An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ED
Label	Thumbnail
66. Procedure.statusCode
Comments	SHALL contain exactly one [1..1] statusCode (CONF:4515-30446).
Control	1..1
Binding	The codes SHALL be taken from ActStatus (required to `http://terminology.hl7.org/ValueSet/v3-ActStatus`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
68. Procedure.statusCode.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
70. Procedure.statusCode.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Comments	This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:4515-31978).
Control	1..1
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code
Fixed Value	`active`
72. Procedure.statusCode.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..0
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code System
74. Procedure.statusCode.codeSystemName
Definition	The common name of the coding system.
Control	0..0
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code System Name
76. Procedure.statusCode.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..0
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code System Version
78. Procedure.statusCode.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..0
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Display Name
80. Procedure.statusCode.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string(oid: ISO Object Identifier)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`valueSet`.
82. Procedure.statusCode.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`valueSetVersion`.
84. Procedure.statusCode.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..0
Type	http://hl7.org/cda/stds/core/StructureDefinition/ED
Label	Original Text
86. Procedure.statusCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/cda/stds/core/StructureDefinition/CR
Label	Qualifier
88. Procedure.statusCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
XML Format	The type of this property is determined using the `xsi:type`attribute.
Label	Translation
90. Procedure.effectiveTime
Short	The effectiveTime in a planned procedure represents the time that the procedure should occur.
Comments	SHOULD contain zero or one [0..1] effectiveTime (CONF:4515-30447).
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS
92. Procedure.priorityCode
Control	0..1
Binding	For example codes, see ActPriority (example to `http://terminology.hl7.org/ValueSet/v3-ActPriority`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CE
94. Procedure.languageCode
Control	0..1
Binding	The codes SHALL be taken from AllLanguages (required to `http://hl7.org/fhir/ValueSet/all-languages`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
96. Procedure.methodCode
Definition	Drawn from concept domain ProcedureMethod
Short	In a planned procedure the provider may suggest that a procedure should be performed using a particular method. MethodCode SHALL NOT conflict with the method inherent in Procedure/code.
Comments	MAY contain zero or more [0..*] methodCode (CONF:4515-31980).
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CE
98. Procedure.approachSiteCode
Definition	Drawn from concept domain ActSite
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
100. Procedure.targetSiteCode
Definition	Drawn from concept domain ActSite
Short	The targetSiteCode is used to identify the part of the body of concern for the planned procedure.
Comments	MAY contain zero or more [0..*] targetSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:4515-31981).
Control	0..*
Binding	The codes SHALL be taken from Body Site Value Set (required to `http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.3.88.12.3221.8.9`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
102. Procedure.subject
Definition	On whom or on what the procedure was performed. This is usually an individual human, but can also be performed on animals, groups of humans or animals, organizations or practitioners (for licensing), locations or devices (for safety inspections or regulatory authorizations). If the actual focus of the procedure is different from the subject, the focus element specifies the actual focus of the procedure.
Short	Individual or entity the procedure was performed on
Control	01..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubjectReference(Patient, Group, Device, Practitioner, Organization, Location)
Is Modifier	false
Alternate Names	patient
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Procedure.specimen
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Specimen
106. Procedure.performer
Definition	Indicates who or what performed the procedure and how they were involved.
Short	The clinician who is expected to perform the procedure could be identified using procedure/performer.Who performed the procedure and what they did
Comments	MAY contain zero or more [0..*] performer (CONF:4515-30449).
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Performer2BackboneElement
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) prc-1: Procedure.performer.onBehalfOf can only be populated when performer.actor isn't Practitioner or PractitionerRole (onBehalfOf.exists() and actor.resolve().exists() implies actor.resolve().where($this is Practitioner or $this is PractitionerRole).empty())
108. Procedure.author
Short	The author in a planned procedure represents the clinician who is requesting or planning the procedure.
Comments	SHOULD contain zero or one [0..1] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-31979).
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation)
110. Procedure.informant
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Informant
112. Procedure.participant
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Participant2
114. Procedure.entryRelationship
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-32996) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
Slicing	This element introduces a set of slices on `Procedure.entryRelationship`. The slices areUnordered and Open, and can be differentiated using the following discriminators: profile @ act profile @ observation
116. Procedure.entryRelationship:priorityPreference
Slice Name	priorityPreference
Short	The following entryRelationship represents the priority that a patient or a provider places on the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31079) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
118. Procedure.entryRelationship:priorityPreference.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
120. Procedure.entryRelationship:priorityPreference.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
122. Procedure.entryRelationship:priorityPreference.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
124. Procedure.entryRelationship:priorityPreference.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
126. Procedure.entryRelationship:priorityPreference.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
128. Procedure.entryRelationship:priorityPreference.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
130. Procedure.entryRelationship:priorityPreference.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
132. Procedure.entryRelationship:priorityPreference.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
134. Procedure.entryRelationship:priorityPreference.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
136. Procedure.entryRelationship:priorityPreference.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31080).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`REFR`
138. Procedure.entryRelationship:priorityPreference.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
140. Procedure.entryRelationship:priorityPreference.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
142. Procedure.entryRelationship:priorityPreference.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
144. Procedure.entryRelationship:priorityPreference.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
146. Procedure.entryRelationship:priorityPreference.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
148. Procedure.entryRelationship:priorityPreference.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
150. Procedure.entryRelationship:priorityPreference.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
152. Procedure.entryRelationship:priorityPreference.observation
Comments	SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:4515-31081).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Priority Preference)
154. Procedure.entryRelationship:priorityPreference.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
156. Procedure.entryRelationship:priorityPreference.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
158. Procedure.entryRelationship:priorityPreference.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
160. Procedure.entryRelationship:priorityPreference.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
162. Procedure.entryRelationship:priorityPreference.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
164. Procedure.entryRelationship:priorityPreference.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
166. Procedure.entryRelationship:indication
Slice Name	indication
Short	The following entryRelationship represents the indication for the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31982) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
168. Procedure.entryRelationship:indication.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
170. Procedure.entryRelationship:indication.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
172. Procedure.entryRelationship:indication.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
174. Procedure.entryRelationship:indication.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
176. Procedure.entryRelationship:indication.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
178. Procedure.entryRelationship:indication.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
180. Procedure.entryRelationship:indication.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
182. Procedure.entryRelationship:indication.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
184. Procedure.entryRelationship:indication.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
186. Procedure.entryRelationship:indication.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31983).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`RSON`
188. Procedure.entryRelationship:indication.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
190. Procedure.entryRelationship:indication.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
192. Procedure.entryRelationship:indication.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
194. Procedure.entryRelationship:indication.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
196. Procedure.entryRelationship:indication.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
198. Procedure.entryRelationship:indication.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
200. Procedure.entryRelationship:indication.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
202. Procedure.entryRelationship:indication.observation
Comments	SHALL contain exactly one [1..1] Indication (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:4515-31984).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Indication)
204. Procedure.entryRelationship:indication.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
206. Procedure.entryRelationship:indication.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
208. Procedure.entryRelationship:indication.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
210. Procedure.entryRelationship:indication.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
212. Procedure.entryRelationship:indication.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
214. Procedure.entryRelationship:indication.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
216. Procedure.entryRelationship:instruction
Slice Name	instruction
Short	The following entryRelationship captures any instructions associated with the planned procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31985) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
218. Procedure.entryRelationship:instruction.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
220. Procedure.entryRelationship:instruction.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
222. Procedure.entryRelationship:instruction.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
224. Procedure.entryRelationship:instruction.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
226. Procedure.entryRelationship:instruction.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
228. Procedure.entryRelationship:instruction.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
230. Procedure.entryRelationship:instruction.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
232. Procedure.entryRelationship:instruction.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
234. Procedure.entryRelationship:instruction.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
236. Procedure.entryRelationship:instruction.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31986).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`SUBJ`
238. Procedure.entryRelationship:instruction.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Comments	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:4515-31987).
Control	1..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`true`
240. Procedure.entryRelationship:instruction.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
242. Procedure.entryRelationship:instruction.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
244. Procedure.entryRelationship:instruction.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
246. Procedure.entryRelationship:instruction.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
248. Procedure.entryRelationship:instruction.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
250. Procedure.entryRelationship:instruction.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
252. Procedure.entryRelationship:instruction.observation
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Instruction Observation)
254. Procedure.entryRelationship:instruction.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
256. Procedure.entryRelationship:instruction.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
258. Procedure.entryRelationship:instruction.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
260. Procedure.entryRelationship:instruction.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
262. Procedure.entryRelationship:instruction.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
264. Procedure.entryRelationship:instruction.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
266. Procedure.entryRelationship:coverage
Slice Name	coverage
Short	The following entryRelationship represents the insurance coverage the patient may have for the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31990) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
268. Procedure.entryRelationship:coverage.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
270. Procedure.entryRelationship:coverage.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
272. Procedure.entryRelationship:coverage.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
274. Procedure.entryRelationship:coverage.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
276. Procedure.entryRelationship:coverage.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
278. Procedure.entryRelationship:coverage.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
280. Procedure.entryRelationship:coverage.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
282. Procedure.entryRelationship:coverage.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
284. Procedure.entryRelationship:coverage.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
286. Procedure.entryRelationship:coverage.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CONF:4515-31991).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`COMP`
288. Procedure.entryRelationship:coverage.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
290. Procedure.entryRelationship:coverage.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
292. Procedure.entryRelationship:coverage.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
294. Procedure.entryRelationship:coverage.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
296. Procedure.entryRelationship:coverage.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
298. Procedure.entryRelationship:coverage.act
Comments	SHALL contain exactly one [1..1] Planned Coverage (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.129) (CONF:4515-31992).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act(Planned Coverage)
300. Procedure.entryRelationship:coverage.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
302. Procedure.entryRelationship:coverage.observation
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation
304. Procedure.entryRelationship:coverage.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
306. Procedure.entryRelationship:coverage.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
308. Procedure.entryRelationship:coverage.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
310. Procedure.entryRelationship:coverage.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
312. Procedure.entryRelationship:coverage.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
314. Procedure.entryRelationship:coverage.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
316. Procedure.entryRelationship:assessmentScale
Slice Name	assessmentScale
Short	When an Assessment Scale Observation is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Assessment scale MAY contain Assessment Scale observations that represent LOINC question and answer pairs from SDOH screening instruments.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-32994) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
318. Procedure.entryRelationship:assessmentScale.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
320. Procedure.entryRelationship:assessmentScale.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
322. Procedure.entryRelationship:assessmentScale.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
324. Procedure.entryRelationship:assessmentScale.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
326. Procedure.entryRelationship:assessmentScale.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
328. Procedure.entryRelationship:assessmentScale.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
330. Procedure.entryRelationship:assessmentScale.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
332. Procedure.entryRelationship:assessmentScale.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
334. Procedure.entryRelationship:assessmentScale.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
336. Procedure.entryRelationship:assessmentScale.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32998).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`RSON`
338. Procedure.entryRelationship:assessmentScale.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
340. Procedure.entryRelationship:assessmentScale.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
342. Procedure.entryRelationship:assessmentScale.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
344. Procedure.entryRelationship:assessmentScale.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
346. Procedure.entryRelationship:assessmentScale.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
348. Procedure.entryRelationship:assessmentScale.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
350. Procedure.entryRelationship:assessmentScale.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
352. Procedure.entryRelationship:assessmentScale.observation
Comments	SHALL contain exactly one [1..1] Assessment Scale Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.69) (CONF:4515-32995).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Assessment Scale Observation)
354. Procedure.entryRelationship:assessmentScale.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
356. Procedure.entryRelationship:assessmentScale.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
358. Procedure.entryRelationship:assessmentScale.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
360. Procedure.entryRelationship:assessmentScale.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
362. Procedure.entryRelationship:assessmentScale.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
364. Procedure.entryRelationship:assessmentScale.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
366. Procedure.entryRelationship:entryReference
Slice Name	entryReference
Short	When an Entry Reference Template is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Entry Reference MAY refer to Assessment Scale Observation in the same document that represent LOINC question and answer pairs from SDOH screening instruments.
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
368. Procedure.entryRelationship:entryReference.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
370. Procedure.entryRelationship:entryReference.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
372. Procedure.entryRelationship:entryReference.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
374. Procedure.entryRelationship:entryReference.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
376. Procedure.entryRelationship:entryReference.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
378. Procedure.entryRelationship:entryReference.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
380. Procedure.entryRelationship:entryReference.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
382. Procedure.entryRelationship:entryReference.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
384. Procedure.entryRelationship:entryReference.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
386. Procedure.entryRelationship:entryReference.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CONF:4515-32999).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`RSON`
388. Procedure.entryRelationship:entryReference.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
390. Procedure.entryRelationship:entryReference.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
392. Procedure.entryRelationship:entryReference.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
394. Procedure.entryRelationship:entryReference.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
396. Procedure.entryRelationship:entryReference.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
398. Procedure.entryRelationship:entryReference.act
Comments	SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32997).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference)
400. Procedure.entryRelationship:entryReference.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
402. Procedure.entryRelationship:entryReference.observation
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation
404. Procedure.entryRelationship:entryReference.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
406. Procedure.entryRelationship:entryReference.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
408. Procedure.entryRelationship:entryReference.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
410. Procedure.entryRelationship:entryReference.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
412. Procedure.entryRelationship:entryReference.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
414. Procedure.entryRelationship:entryReference.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
416. Procedure.reference
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Reference
418. Procedure.precondition
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Precondition
420. Procedure.sdtcPrecondition2
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Precondition2
XML Format	In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`precondition2`.
422. Procedure.sdtcInFulfillmentOf1
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1
XML Format	In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`inFulfillmentOf1`.

Guidance on how to interpret the contents of this table can be foundhere

0. Procedure
Logical Container	ClinicalDocument (CDA Class)
Validation	Instance of this type are validated by templateId
XML Format	In the XML format, this property has the namespace `urn:hl7-org:v3`.
Invariants	should-text-ref-value: SHOULD contain text/reference/@value (`text.reference.value.exists()`) should-sdtcCategory: SHOULD contain sdtcCategory (`sdtcCategory.exists()`) should-effectiveTime: SHOULD contain effectiveTime (`effectiveTime.exists()`) should-author: SHOULD contain author (`author.exists()`)
2. Procedure.templateId
Control	1..?
Slicing	This element introduces a set of slices on `Procedure.templateId`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ root value @ extension
4. Procedure.templateId:planned-proc
Slice Name	planned-proc
Control	1..1
6. Procedure.templateId:planned-proc.root
Control	1..?
Pattern Value	`2.16.840.1.113883.10.20.22.4.41`
8. Procedure.templateId:planned-proc.extension
Control	1..?
Pattern Value	`2022-06-01`
10. Procedure.classCode
Comments	SHALL contain exactly one [1..1] @classCode="PROC" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-8568).
12. Procedure.moodCode
Comments	SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (Act/Encounter/Procedure) urn:oid:2.16.840.1.113883.11.20.9.23 STATIC 2011-09-30 (CONF:4515-8569).
Binding	The codes SHALL be taken from Planned moodCode (Act/Encounter/Procedure) (required to `http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.23`)
14. Procedure.id
Comments	SHALL contain at least one [1..*] id (CONF:4515-8571).
Control	1..?
16. Procedure.sdtcCategory
Binding	The codes SHOULD be taken from US Core ServiceRequest Category Codes (preferred to `http://hl7.org/fhir/us/core/ValueSet/us-core-servicerequest-category`)
18. Procedure.code
Short	𝗨𝗦𝗖𝗗𝗜: SDOH Interventions
Comments	This code SHALL contain exactly one [1..1] @code, which SHOULD be selected from ValueSet US Core Procedure Codes urn:oid:2.16.840.1.113883.4.642.40.48.31 .
Control	1..?
Binding	The codes SHOULD be taken from US Core Procedure Codes (preferred to `http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code`)
20. Procedure.text
Short	SHOULD reference the portion of section narrative text corresponding to this entry
22. Procedure.text.reference
Invariants	value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (`value.exists() implies value.startsWith('#')`)
24. Procedure.statusCode
Comments	SHALL contain exactly one [1..1] statusCode (CONF:4515-30446).
Control	1..?
26. Procedure.statusCode.code
Comments	This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:4515-31978).
Control	1..?
Fixed Value	`active`
28. Procedure.effectiveTime
Short	The effectiveTime in a planned procedure represents the time that the procedure should occur.
Comments	SHOULD contain zero or one [0..1] effectiveTime (CONF:4515-30447).
30. Procedure.methodCode
Short	In a planned procedure the provider may suggest that a procedure should be performed using a particular method. MethodCode SHALL NOT conflict with the method inherent in Procedure/code.
Comments	MAY contain zero or more [0..*] methodCode (CONF:4515-31980).
32. Procedure.targetSiteCode
Short	The targetSiteCode is used to identify the part of the body of concern for the planned procedure.
Comments	MAY contain zero or more [0..*] targetSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:4515-31981).
Binding	The codes SHALL be taken from Body Site Value Set (required to `http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.3.88.12.3221.8.9`)
34. Procedure.performer
Short	The clinician who is expected to perform the procedure could be identified using procedure/performer.
Comments	MAY contain zero or more [0..*] performer (CONF:4515-30449).
36. Procedure.author
Short	The author in a planned procedure represents the clinician who is requesting or planning the procedure.
Comments	SHOULD contain zero or one [0..1] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-31979).
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation)
38. Procedure.entryRelationship
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-32996) such that it
Slicing	This element introduces a set of slices on `Procedure.entryRelationship`. The slices areUnordered and Open, and can be differentiated using the following discriminators: profile @ act profile @ observation
40. Procedure.entryRelationship:priorityPreference
Slice Name	priorityPreference
Short	The following entryRelationship represents the priority that a patient or a provider places on the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31079) such that it
Control	0..*
42. Procedure.entryRelationship:priorityPreference.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31080).
Fixed Value	`REFR`
44. Procedure.entryRelationship:priorityPreference.observation
Comments	SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:4515-31081).
Control	1..?
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Priority Preference)
46. Procedure.entryRelationship:indication
Slice Name	indication
Short	The following entryRelationship represents the indication for the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31982) such that it
Control	0..*
48. Procedure.entryRelationship:indication.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31983).
Fixed Value	`RSON`
50. Procedure.entryRelationship:indication.observation
Comments	SHALL contain exactly one [1..1] Indication (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:4515-31984).
Control	1..?
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Indication)
52. Procedure.entryRelationship:instruction
Slice Name	instruction
Short	The following entryRelationship captures any instructions associated with the planned procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31985) such that it
Control	0..*
54. Procedure.entryRelationship:instruction.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31986).
Fixed Value	`SUBJ`
56. Procedure.entryRelationship:instruction.inversionInd
Comments	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:4515-31987).
Control	1..?
Fixed Value	`true`
58. Procedure.entryRelationship:instruction.observation
Control	1..?
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Instruction Observation)
60. Procedure.entryRelationship:coverage
Slice Name	coverage
Short	The following entryRelationship represents the insurance coverage the patient may have for the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31990) such that it
Control	0..*
62. Procedure.entryRelationship:coverage.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CONF:4515-31991).
Fixed Value	`COMP`
64. Procedure.entryRelationship:coverage.act
Comments	SHALL contain exactly one [1..1] Planned Coverage (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.129) (CONF:4515-31992).
Control	1..?
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act(Planned Coverage)
66. Procedure.entryRelationship:assessmentScale
Slice Name	assessmentScale
Short	When an Assessment Scale Observation is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Assessment scale MAY contain Assessment Scale observations that represent LOINC question and answer pairs from SDOH screening instruments.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-32994) such that it
Control	0..*
68. Procedure.entryRelationship:assessmentScale.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32998).
Fixed Value	`RSON`
70. Procedure.entryRelationship:assessmentScale.observation
Comments	SHALL contain exactly one [1..1] Assessment Scale Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.69) (CONF:4515-32995).
Control	1..?
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Assessment Scale Observation)
72. Procedure.entryRelationship:entryReference
Slice Name	entryReference
Short	When an Entry Reference Template is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Entry Reference MAY refer to Assessment Scale Observation in the same document that represent LOINC question and answer pairs from SDOH screening instruments.
Control	0..*
74. Procedure.entryRelationship:entryReference.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CONF:4515-32999).
Fixed Value	`RSON`
76. Procedure.entryRelationship:entryReference.act
Comments	SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32997).
Control	1..?
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference)

Guidance on how to interpret the contents of this table can be foundhere

0. Procedure
Definition	Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.
Short	Base for all types and resources
Control	1..1
Is Modifier	false
Logical Container	ClinicalDocument (CDA Class)
Validation	Instance of this type are validated by templateId
XML Format	In the XML format, this property has the namespace `urn:hl7-org:v3`.
Invariants	should-text-ref-value: SHOULD contain text/reference/@value (`text.reference.value.exists()`) should-sdtcCategory: SHOULD contain sdtcCategory (`sdtcCategory.exists()`) should-effectiveTime: SHOULD contain effectiveTime (`effectiveTime.exists()`) should-author: SHOULD contain author (`author.exists()`)
2. Procedure.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
4. Procedure.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
6. Procedure.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
8. Procedure.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
10. Procedure.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
12. Procedure.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
14. Procedure.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
16. Procedure.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
18. Procedure.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Slicing	This element introduces a set of slices on `Procedure.templateId`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ root value @ extension
20. Procedure.templateId:planned-proc
Slice Name	planned-proc
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
22. Procedure.templateId:planned-proc.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
24. Procedure.templateId:planned-proc.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
26. Procedure.templateId:planned-proc.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
28. Procedure.templateId:planned-proc.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Pattern Value	`2.16.840.1.113883.10.20.22.4.41`
30. Procedure.templateId:planned-proc.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
Pattern Value	`2022-06-01`
32. Procedure.classCode
Comments	SHALL contain exactly one [1..1] @classCode="PROC" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-8568).
Control	1..1
Binding	The codes SHALL be taken from ActClassProcedure (required to `http://terminology.hl7.org/ValueSet/v3-ActClassProcedure`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`PROC`
34. Procedure.moodCode
Comments	SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (Act/Encounter/Procedure) urn:oid:2.16.840.1.113883.11.20.9.23 STATIC 2011-09-30 (CONF:4515-8569).
Control	1..1
Binding	The codes SHALL be taken from Planned moodCode (Act/Encounter/Procedure) (required to `http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.23`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
36. Procedure.id
Comments	SHALL contain at least one [1..*] id (CONF:4515-8571).
Control	1..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
38. Procedure.sdtcCategory
Control	0..*
Binding	The codes SHOULD be taken from US Core ServiceRequest Category Codes (preferred to `http://hl7.org/fhir/us/core/ValueSet/us-core-servicerequest-category`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
XML Format	In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`category`.
40. Procedure.code
Definition	Drawn from concept domain ActCode
Short	Changed:𝗨𝗦𝗖𝗗𝗜: SDOH Interventions
Comments	This code SHALL contain exactly one [1..1] @code, which SHOULD be selected from ValueSet US Core Procedure Codes urn:oid:2.16.840.1.113883.4.642.40.48.31 .
Control	1..1
Binding	The codes SHOULD be taken from US Core Procedure Codes (preferred to `http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
42. Procedure.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
44. Procedure.text
Short	SHOULD reference the portion of section narrative text corresponding to this entry
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ED
46. Procedure.text.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
48. Procedure.text.compression
Definition	Indicates whether the raw byte data is compressed, and what compression algorithm was used.
Control	0..1
Binding	The codes SHALL be taken from CDACompressionAlgorithm (required to `http://hl7.org/cda/stds/core/ValueSet/CDACompressionAlgorithm`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Compression
50. Procedure.text.integrityCheck
Definition	The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created.
Control	0..1
Type	base64Binary(bin: Binary Data)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Integrity Check
52. Procedure.text.integrityCheckAlgorithm
Definition	Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage.
Control	0..1
Binding	The codes SHALL be taken from IntegrityCheckAlgorithm (2.0.0) (required to `http://terminology.hl7.org/ValueSet/v3-IntegrityCheckAlgorithm\|2.0.0`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Integrity Check Algorithm
54. Procedure.text.language
Definition	For character based information the language property specifies the human language of the text.
Control	0..1
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Language
56. Procedure.text.mediaType
Definition	Identifies the type of the encapsulated data and identifies a method to interpret or render the data.
Control	0..1
Binding	For example codes, see MediaType (example to `http://terminology.hl7.org/ValueSet/v3-MediaType`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Media Type
58. Procedure.text.representation
Control	0..1
Binding	The codes SHALL be taken from CDABinaryDataEncoding (required to `http://hl7.org/cda/stds/core/ValueSet/BinaryDataEncoding`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
60. Procedure.text.xmlText
Definition	Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.)
Short	Allows for mixed text content. If @representation='B64', this SHALL be a base64binary string.
Comments	This element is represented in XML as textual content. The actual name "xmlText" will not appear in a CDA instance.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as unadorned text.
62. Procedure.text.reference
Definition	A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/TEL
Label	Reference
Invariants	value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (`value.exists() implies value.startsWith('#')`)
64. Procedure.text.thumbnail
Definition	An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ED
Label	Thumbnail
66. Procedure.statusCode
Comments	SHALL contain exactly one [1..1] statusCode (CONF:4515-30446).
Control	1..1
Binding	The codes SHALL be taken from ActStatus (required to `http://terminology.hl7.org/ValueSet/v3-ActStatus`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
68. Procedure.statusCode.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
70. Procedure.statusCode.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Comments	This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:4515-31978).
Control	1..1
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code
Fixed Value	`active`
72. Procedure.statusCode.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..0
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code System
74. Procedure.statusCode.codeSystemName
Definition	The common name of the coding system.
Control	0..0
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code System Name
76. Procedure.statusCode.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..0
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Code System Version
78. Procedure.statusCode.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..0
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Display Name
80. Procedure.statusCode.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string(oid: ISO Object Identifier)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`valueSet`.
82. Procedure.statusCode.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`valueSetVersion`.
84. Procedure.statusCode.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..0
Type	http://hl7.org/cda/stds/core/StructureDefinition/ED
Label	Original Text
86. Procedure.statusCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/cda/stds/core/StructureDefinition/CR
Label	Qualifier
88. Procedure.statusCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
XML Format	The type of this property is determined using the `xsi:type`attribute.
Label	Translation
90. Procedure.effectiveTime
Short	The effectiveTime in a planned procedure represents the time that the procedure should occur.
Comments	SHOULD contain zero or one [0..1] effectiveTime (CONF:4515-30447).
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS
92. Procedure.priorityCode
Control	0..1
Binding	For example codes, see ActPriority (example to `http://terminology.hl7.org/ValueSet/v3-ActPriority`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CE
94. Procedure.languageCode
Control	0..1
Binding	The codes SHALL be taken from AllLanguages (required to `http://hl7.org/fhir/ValueSet/all-languages`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
96. Procedure.methodCode
Definition	Drawn from concept domain ProcedureMethod
Short	In a planned procedure the provider may suggest that a procedure should be performed using a particular method. MethodCode SHALL NOT conflict with the method inherent in Procedure/code.
Comments	MAY contain zero or more [0..*] methodCode (CONF:4515-31980).
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CE
98. Procedure.approachSiteCode
Definition	Drawn from concept domain ActSite
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
100. Procedure.targetSiteCode
Definition	Drawn from concept domain ActSite
Short	The targetSiteCode is used to identify the part of the body of concern for the planned procedure.
Comments	MAY contain zero or more [0..*] targetSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:4515-31981).
Control	0..*
Binding	The codes SHALL be taken from Body Site Value Set (required to `http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.3.88.12.3221.8.9`)
Type	http://hl7.org/cda/stds/core/StructureDefinition/CD
102. Procedure.subject
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Subject
104. Procedure.specimen
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Specimen
106. Procedure.performer
Short	The clinician who is expected to perform the procedure could be identified using procedure/performer.
Comments	MAY contain zero or more [0..*] performer (CONF:4515-30449).
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Performer2
108. Procedure.author
Short	The author in a planned procedure represents the clinician who is requesting or planning the procedure.
Comments	SHOULD contain zero or one [0..1] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-31979).
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation)
110. Procedure.informant
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Informant
112. Procedure.participant
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Participant2
114. Procedure.entryRelationship
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-32996) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
Slicing	This element introduces a set of slices on `Procedure.entryRelationship`. The slices areUnordered and Open, and can be differentiated using the following discriminators: profile @ act profile @ observation
116. Procedure.entryRelationship:priorityPreference
Slice Name	priorityPreference
Short	The following entryRelationship represents the priority that a patient or a provider places on the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31079) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
118. Procedure.entryRelationship:priorityPreference.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
120. Procedure.entryRelationship:priorityPreference.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
122. Procedure.entryRelationship:priorityPreference.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
124. Procedure.entryRelationship:priorityPreference.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
126. Procedure.entryRelationship:priorityPreference.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
128. Procedure.entryRelationship:priorityPreference.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
130. Procedure.entryRelationship:priorityPreference.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
132. Procedure.entryRelationship:priorityPreference.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
134. Procedure.entryRelationship:priorityPreference.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
136. Procedure.entryRelationship:priorityPreference.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31080).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`REFR`
138. Procedure.entryRelationship:priorityPreference.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
140. Procedure.entryRelationship:priorityPreference.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
142. Procedure.entryRelationship:priorityPreference.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
144. Procedure.entryRelationship:priorityPreference.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
146. Procedure.entryRelationship:priorityPreference.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
148. Procedure.entryRelationship:priorityPreference.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
150. Procedure.entryRelationship:priorityPreference.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
152. Procedure.entryRelationship:priorityPreference.observation
Comments	SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:4515-31081).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Priority Preference)
154. Procedure.entryRelationship:priorityPreference.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
156. Procedure.entryRelationship:priorityPreference.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
158. Procedure.entryRelationship:priorityPreference.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
160. Procedure.entryRelationship:priorityPreference.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
162. Procedure.entryRelationship:priorityPreference.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
164. Procedure.entryRelationship:priorityPreference.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
166. Procedure.entryRelationship:indication
Slice Name	indication
Short	The following entryRelationship represents the indication for the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31982) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
168. Procedure.entryRelationship:indication.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
170. Procedure.entryRelationship:indication.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
172. Procedure.entryRelationship:indication.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
174. Procedure.entryRelationship:indication.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
176. Procedure.entryRelationship:indication.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
178. Procedure.entryRelationship:indication.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
180. Procedure.entryRelationship:indication.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
182. Procedure.entryRelationship:indication.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
184. Procedure.entryRelationship:indication.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
186. Procedure.entryRelationship:indication.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31983).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`RSON`
188. Procedure.entryRelationship:indication.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
190. Procedure.entryRelationship:indication.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
192. Procedure.entryRelationship:indication.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
194. Procedure.entryRelationship:indication.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
196. Procedure.entryRelationship:indication.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
198. Procedure.entryRelationship:indication.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
200. Procedure.entryRelationship:indication.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
202. Procedure.entryRelationship:indication.observation
Comments	SHALL contain exactly one [1..1] Indication (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:4515-31984).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Indication)
204. Procedure.entryRelationship:indication.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
206. Procedure.entryRelationship:indication.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
208. Procedure.entryRelationship:indication.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
210. Procedure.entryRelationship:indication.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
212. Procedure.entryRelationship:indication.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
214. Procedure.entryRelationship:indication.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
216. Procedure.entryRelationship:instruction
Slice Name	instruction
Short	The following entryRelationship captures any instructions associated with the planned procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31985) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
218. Procedure.entryRelationship:instruction.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
220. Procedure.entryRelationship:instruction.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
222. Procedure.entryRelationship:instruction.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
224. Procedure.entryRelationship:instruction.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
226. Procedure.entryRelationship:instruction.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
228. Procedure.entryRelationship:instruction.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
230. Procedure.entryRelationship:instruction.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
232. Procedure.entryRelationship:instruction.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
234. Procedure.entryRelationship:instruction.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
236. Procedure.entryRelationship:instruction.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31986).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`SUBJ`
238. Procedure.entryRelationship:instruction.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Comments	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:4515-31987).
Control	1..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`true`
240. Procedure.entryRelationship:instruction.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
242. Procedure.entryRelationship:instruction.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
244. Procedure.entryRelationship:instruction.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
246. Procedure.entryRelationship:instruction.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
248. Procedure.entryRelationship:instruction.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
250. Procedure.entryRelationship:instruction.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
252. Procedure.entryRelationship:instruction.observation
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Instruction Observation)
254. Procedure.entryRelationship:instruction.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
256. Procedure.entryRelationship:instruction.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
258. Procedure.entryRelationship:instruction.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
260. Procedure.entryRelationship:instruction.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
262. Procedure.entryRelationship:instruction.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
264. Procedure.entryRelationship:instruction.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
266. Procedure.entryRelationship:coverage
Slice Name	coverage
Short	The following entryRelationship represents the insurance coverage the patient may have for the procedure.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-31990) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
268. Procedure.entryRelationship:coverage.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
270. Procedure.entryRelationship:coverage.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
272. Procedure.entryRelationship:coverage.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
274. Procedure.entryRelationship:coverage.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
276. Procedure.entryRelationship:coverage.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
278. Procedure.entryRelationship:coverage.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
280. Procedure.entryRelationship:coverage.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
282. Procedure.entryRelationship:coverage.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
284. Procedure.entryRelationship:coverage.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
286. Procedure.entryRelationship:coverage.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CONF:4515-31991).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`COMP`
288. Procedure.entryRelationship:coverage.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
290. Procedure.entryRelationship:coverage.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
292. Procedure.entryRelationship:coverage.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
294. Procedure.entryRelationship:coverage.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
296. Procedure.entryRelationship:coverage.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
298. Procedure.entryRelationship:coverage.act
Comments	SHALL contain exactly one [1..1] Planned Coverage (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.129) (CONF:4515-31992).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act(Planned Coverage)
300. Procedure.entryRelationship:coverage.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
302. Procedure.entryRelationship:coverage.observation
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation
304. Procedure.entryRelationship:coverage.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
306. Procedure.entryRelationship:coverage.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
308. Procedure.entryRelationship:coverage.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
310. Procedure.entryRelationship:coverage.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
312. Procedure.entryRelationship:coverage.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
314. Procedure.entryRelationship:coverage.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
316. Procedure.entryRelationship:assessmentScale
Slice Name	assessmentScale
Short	When an Assessment Scale Observation is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Assessment scale MAY contain Assessment Scale observations that represent LOINC question and answer pairs from SDOH screening instruments.
Comments	MAY contain zero or more [0..*] entryRelationship (CONF:4515-32994) such that it
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
318. Procedure.entryRelationship:assessmentScale.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
320. Procedure.entryRelationship:assessmentScale.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
322. Procedure.entryRelationship:assessmentScale.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
324. Procedure.entryRelationship:assessmentScale.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
326. Procedure.entryRelationship:assessmentScale.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
328. Procedure.entryRelationship:assessmentScale.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
330. Procedure.entryRelationship:assessmentScale.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
332. Procedure.entryRelationship:assessmentScale.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
334. Procedure.entryRelationship:assessmentScale.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
336. Procedure.entryRelationship:assessmentScale.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32998).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`RSON`
338. Procedure.entryRelationship:assessmentScale.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
340. Procedure.entryRelationship:assessmentScale.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
342. Procedure.entryRelationship:assessmentScale.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
344. Procedure.entryRelationship:assessmentScale.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
346. Procedure.entryRelationship:assessmentScale.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
348. Procedure.entryRelationship:assessmentScale.act
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act
350. Procedure.entryRelationship:assessmentScale.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
352. Procedure.entryRelationship:assessmentScale.observation
Comments	SHALL contain exactly one [1..1] Assessment Scale Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.69) (CONF:4515-32995).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation(Assessment Scale Observation)
354. Procedure.entryRelationship:assessmentScale.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
356. Procedure.entryRelationship:assessmentScale.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
358. Procedure.entryRelationship:assessmentScale.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
360. Procedure.entryRelationship:assessmentScale.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
362. Procedure.entryRelationship:assessmentScale.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
364. Procedure.entryRelationship:assessmentScale.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
366. Procedure.entryRelationship:entryReference
Slice Name	entryReference
Short	When an Entry Reference Template is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Entry Reference MAY refer to Assessment Scale Observation in the same document that represent LOINC question and answer pairs from SDOH screening instruments.
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
368. Procedure.entryRelationship:entryReference.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
370. Procedure.entryRelationship:entryReference.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/CS
372. Procedure.entryRelationship:entryReference.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
Invariants	II-1: An II instance must have either a root or an nullFlavor. (`root.exists() or nullFlavor.exists()`)
374. Procedure.entryRelationship:entryReference.typeId.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from CDANullFlavor (required to `http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Exceptional Value Detail
376. Procedure.entryRelationship:entryReference.typeId.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Assigning Authority Name
378. Procedure.entryRelationship:entryReference.typeId.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Displayable
380. Procedure.entryRelationship:entryReference.typeId.root
Definition	Identifies the type as an HL7 Registered model
Control	1..1
Type	string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Root
Fixed Value	`2.16.840.1.113883.1.3`
382. Procedure.entryRelationship:entryReference.typeId.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string(st: Character String)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Label	Extension
384. Procedure.entryRelationship:entryReference.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/II
386. Procedure.entryRelationship:entryReference.typeCode
Comments	SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CONF:4515-32999).
Control	1..1
Binding	The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to `http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship`)
Type	code(cs: Coded Simple Value)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`RSON`
388. Procedure.entryRelationship:entryReference.inversionInd
Definition	The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
390. Procedure.entryRelationship:entryReference.contextConductionInd
Definition	The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Default Value	`true`
392. Procedure.entryRelationship:entryReference.negationInd
Control	0..1
Type	boolean(bl: Boolean)
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
394. Procedure.entryRelationship:entryReference.sequenceNumber
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/INT
396. Procedure.entryRelationship:entryReference.seperatableInd
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/BL
398. Procedure.entryRelationship:entryReference.act
Comments	SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32997).
Control	1..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference)
400. Procedure.entryRelationship:entryReference.encounter
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Encounter
402. Procedure.entryRelationship:entryReference.observation
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Observation
404. Procedure.entryRelationship:entryReference.observationMedia
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
406. Procedure.entryRelationship:entryReference.organizer
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Organizer
408. Procedure.entryRelationship:entryReference.procedure
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Procedure
410. Procedure.entryRelationship:entryReference.regionOfInterest
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
412. Procedure.entryRelationship:entryReference.substanceAdministration
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
414. Procedure.entryRelationship:entryReference.supply
Control	0..1
Type	http://hl7.org/cda/stds/core/StructureDefinition/Supply
416. Procedure.reference
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Reference
418. Procedure.precondition
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Precondition
420. Procedure.sdtcPrecondition2
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/Precondition2
XML Format	In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`precondition2`.
422. Procedure.sdtcInFulfillmentOf1
Control	0..*
Type	http://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1
XML Format	In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name`inFulfillmentOf1`.