Consolidated CDA (C-CDA)
4.0.0 - STU4 United States of America flag

This page is part of the CCDA: Consolidated CDA Release (v4.0.0: CCDA 4.0) generated with FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version. For a full list of available versions, see the Directory of published versions

Logical Model: MedicationInformation - Detailed Descriptions

Draft as of 2025-06-20

Definitions for the MedicationInformation logical model.

Guidance on how to interpret the contents of this table can be foundhere

0. ManufacturedProduct
Definition

Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.


Base definition for all types defined in FHIR type system.

ShortBase for all types and resources
Control10..1*
Is Modifierfalse
Logical ContainerClinicalDocument (CDA Class)
ValidationInstance of this type are validated by templateId
XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
Invariantsproduct-choice: manufacturedLabeledDrug and manufacturedMaterial are mutually exclusive (one must be present) ((manufacturedLabeledDrug | manufacturedMaterial).count() = 1)
2. ManufacturedProduct.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from CDANullFlavor
(required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExceptional Value Detail
4. ManufacturedProduct.realmCode
Definition

When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
6. ManufacturedProduct.typeId
Definition

When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

Control0..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
InvariantsII-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists())
8. ManufacturedProduct.typeId.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from CDANullFlavor
(required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExceptional Value Detail
10. ManufacturedProduct.typeId.assigningAuthorityName
Definition

A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelAssigning Authority Name
12. ManufacturedProduct.typeId.displayable
Definition

Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

Control0..1
Typeboolean(bl: Boolean)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelDisplayable
14. ManufacturedProduct.typeId.root
Definition

Identifies the type as an HL7 Registered model

Control1..1
Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelRoot
Fixed Value2.16.840.1.113883.1.3
16. ManufacturedProduct.typeId.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control1..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExtension
18. ManufacturedProduct.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
SlicingThis element introduces a set of slices on ManufacturedProduct.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • value @ extension
  • 20. ManufacturedProduct.templateId:med-information
    Slice Namemed-information
    Definition

    When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

    Control1..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
    22. ManufacturedProduct.templateId:med-information.nullFlavor
    Definition

    If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

    Control0..1
    BindingThe codes SHALL be taken from CDANullFlavor
    (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelExceptional Value Detail
    24. ManufacturedProduct.templateId:med-information.assigningAuthorityName
    Definition

    A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

    Control0..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelAssigning Authority Name
    26. ManufacturedProduct.templateId:med-information.displayable
    Definition

    Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

    Control0..1
    Typeboolean(bl: Boolean)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelDisplayable
    28. ManufacturedProduct.templateId:med-information.root
    Definition

    A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

    Control1..1
    Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelRoot
    Pattern Value2.16.840.1.113883.10.20.22.4.23
    30. ManufacturedProduct.templateId:med-information.extension
    Definition

    A character string as a unique identifier within the scope of the identifier root.

    Control1..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelExtension
    Pattern Value2014-06-09
    32. ManufacturedProduct.classCode
    Comments

    SHALL contain exactly one [1..1] @classCode="MANU" (CodeSystem: HL7RoleClass urn:oid:2.16.840.1.113883.5.110 STATIC) (CONF:1098-7408).

    Control1..1
    BindingThe codes SHALL be taken from RoleClassManufacturedProduct
    (required to http://terminology.hl7.org/ValueSet/v3-RoleClassManufacturedProduct)
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed ValueMANU
    34. ManufacturedProduct.id
    Comments

    MAY contain zero or more [0..*] id (CONF:1098-7410).

    Control0..*
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
    36. ManufacturedProduct.sdtcIdentifiedBy
    Control0..*
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/IdentifiedBy
    XML FormatIn the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameidentifiedBy.
    38. ManufacturedProduct.manufacturedLabeledDrug
    Control0..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/LabeledDrug
    40. ManufacturedProduct.manufacturedMaterial
    ShortA medication should be recorded as a pre-coordinated ingredient + strength + dose form (e.g., “metoprolol 25mg tablet”, “amoxicillin 400mg/5mL suspension”) where possible. This includes RxNorm codes whose Term Type is SCD (semantic clinical drug), SBD (semantic brand drug), GPCK (generic pack), BPCK (brand pack).
    Comments

    SHALL contain exactly one [1..1] manufacturedMaterial (CONF:1098-7411).

    Control1..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/Material
    42. ManufacturedProduct.manufacturedMaterial.nullFlavor
    Definition

    If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

    Control0..1
    BindingThe codes SHALL be taken from CDANullFlavor
    (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelExceptional Value Detail
    44. ManufacturedProduct.manufacturedMaterial.realmCode
    Definition

    When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

    Control0..*
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
    46. ManufacturedProduct.manufacturedMaterial.typeId
    Definition

    When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

    Control0..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
    InvariantsII-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists())
    48. ManufacturedProduct.manufacturedMaterial.typeId.nullFlavor
    Definition

    If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

    Control0..1
    BindingThe codes SHALL be taken from CDANullFlavor
    (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelExceptional Value Detail
    50. ManufacturedProduct.manufacturedMaterial.typeId.assigningAuthorityName
    Definition

    A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

    Control0..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelAssigning Authority Name
    52. ManufacturedProduct.manufacturedMaterial.typeId.displayable
    Definition

    Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

    Control0..1
    Typeboolean(bl: Boolean)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelDisplayable
    54. ManufacturedProduct.manufacturedMaterial.typeId.root
    Definition

    Identifies the type as an HL7 Registered model

    Control1..1
    Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelRoot
    Fixed Value2.16.840.1.113883.1.3
    56. ManufacturedProduct.manufacturedMaterial.typeId.extension
    Definition

    A character string as a unique identifier within the scope of the identifier root.

    Control1..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelExtension
    58. ManufacturedProduct.manufacturedMaterial.templateId
    Definition

    When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

    Control0..*
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
    60. ManufacturedProduct.manufacturedMaterial.classCode
    Control0..1
    BindingThe codes SHALL be taken from EntityClassManufacturedMaterial
    (required to http://terminology.hl7.org/ValueSet/v3-EntityClassManufacturedMaterial)
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed ValueMMAT
    62. ManufacturedProduct.manufacturedMaterial.determinerCode
    Control0..1
    BindingThe codes SHALL be taken from EntityDeterminerDetermined
    (required to http://terminology.hl7.org/ValueSet/v3-EntityDeterminerDetermined)
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed ValueKIND
    64. ManufacturedProduct.manufacturedMaterial.code
    Comments

    This manufacturedMaterial SHALL contain exactly one [1..1] code, which SHALL be selected from ValueSet Medication Clinical Drug urn:oid:2.16.840.1.113762.1.4.1010.4 DYNAMIC (CONF:1098-7412).

    Control1..1
    BindingThe codes SHALL be taken from Medication Clinical Drug .
    (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.4)
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
    66. ManufacturedProduct.manufacturedMaterial.code.nullFlavor
    Definition

    If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

    Control0..1
    BindingThe codes SHALL be taken from CDANullFlavor
    (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelExceptional Value Detail
    68. ManufacturedProduct.manufacturedMaterial.code.code
    Definition

    The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

    Control0..1
    Typecode(cs: Coded Simple Value)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelCode
    70. ManufacturedProduct.manufacturedMaterial.code.codeSystem
    Definition

    Specifies the code system that defines the code.

    Control0..1
    Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelCode System
    72. ManufacturedProduct.manufacturedMaterial.code.codeSystemName
    Definition

    The common name of the coding system.

    Control0..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelCode System Name
    74. ManufacturedProduct.manufacturedMaterial.code.codeSystemVersion
    Definition

    If applicable, a version descriptor defined specifically for the given code system.

    Control0..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelCode System Version
    76. ManufacturedProduct.manufacturedMaterial.code.displayName
    Definition

    A name or title for the code, under which the sending system shows the code value to its users.

    Control0..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    LabelDisplay Name
    78. ManufacturedProduct.manufacturedMaterial.code.sdtcValueSet
    Definition

    The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

    Control0..1
    Typestring(oid: ISO Object Identifier)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet.
    80. ManufacturedProduct.manufacturedMaterial.code.sdtcValueSetVersion
    Definition

    The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

    Control0..1
    Typestring(st: Character String)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion.
    82. ManufacturedProduct.manufacturedMaterial.code.originalText
    Definition

    The text or phrase used as the basis for the coding.

    Control0..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
    LabelOriginal Text
    84. ManufacturedProduct.manufacturedMaterial.code.qualifier
    Definition

    Specifies additional codes that increase the specificity of the the primary code.

    Control0..0
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
    LabelQualifier
    86. ManufacturedProduct.manufacturedMaterial.code.translation
    Definition

    A set of other concept descriptors that translate this concept descriptor into other code systems.

    ShortTranslations may also be sent with NDC codes (Codesystem urn:oid:2.16.840.1.113883.6.69).
    Comments

    This code MAY contain zero or more [0..] translation, which SHALL be selected from ValueSet Clinical Substance urn:oid:2.16.840.1.113762.1.4.1010.2 DYNAMIC (CONF:1098-31884). This code MAY contain zero or more [0..] translation, which SHALL be selected from CodeSystem NDC urn:oid:2.16.840.1.113883.6.69.

    Control0..*
    BindingThe codes SHOULD be taken from Clinical Substance .
    (preferred to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.2)
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
    XML FormatThe type of this property is determined using the xsi:typeattribute.
    LabelTranslation
    88. ManufacturedProduct.manufacturedMaterial.name
    Control0..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/EN
    90. ManufacturedProduct.manufacturedMaterial.lotNumberText
    Control0..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/ST
    92. ManufacturedProduct.manufacturerOrganization
    Comments

    MAY contain zero or one [0..1] manufacturerOrganization (CONF:1098-7416).

    Control0..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/Organization

    Guidance on how to interpret the contents of this table can be foundhere

    0. ManufacturedProduct
    Logical ContainerClinicalDocument (CDA Class)
    ValidationInstance of this type are validated by templateId
    XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
    2. ManufacturedProduct.templateId
    Control1..?
    SlicingThis element introduces a set of slices on ManufacturedProduct.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ root
    • value @ extension
    • 4. ManufacturedProduct.templateId:med-information
      Slice Namemed-information
      Control1..1
      6. ManufacturedProduct.templateId:med-information.root
      Control1..?
      Pattern Value2.16.840.1.113883.10.20.22.4.23
      8. ManufacturedProduct.templateId:med-information.extension
      Control1..?
      Pattern Value2014-06-09
      10. ManufacturedProduct.classCode
      Comments

      SHALL contain exactly one [1..1] @classCode="MANU" (CodeSystem: HL7RoleClass urn:oid:2.16.840.1.113883.5.110 STATIC) (CONF:1098-7408).

      Control1..?
      12. ManufacturedProduct.id
      Comments

      MAY contain zero or more [0..*] id (CONF:1098-7410).

      14. ManufacturedProduct.manufacturedMaterial
      ShortA medication should be recorded as a pre-coordinated ingredient + strength + dose form (e.g., “metoprolol 25mg tablet”, “amoxicillin 400mg/5mL suspension”) where possible. This includes RxNorm codes whose Term Type is SCD (semantic clinical drug), SBD (semantic brand drug), GPCK (generic pack), BPCK (brand pack).
      Comments

      SHALL contain exactly one [1..1] manufacturedMaterial (CONF:1098-7411).

      Control1..?
      16. ManufacturedProduct.manufacturedMaterial.code
      Comments

      This manufacturedMaterial SHALL contain exactly one [1..1] code, which SHALL be selected from ValueSet Medication Clinical Drug urn:oid:2.16.840.1.113762.1.4.1010.4 DYNAMIC (CONF:1098-7412).

      Control1..?
      BindingThe codes SHALL be taken from Medication Clinical Drug .
      (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.4)
      18. ManufacturedProduct.manufacturedMaterial.code.translation
      ShortTranslations may also be sent with NDC codes (Codesystem urn:oid:2.16.840.1.113883.6.69).
      Comments

      This code MAY contain zero or more [0..] translation, which SHALL be selected from ValueSet Clinical Substance urn:oid:2.16.840.1.113762.1.4.1010.2 DYNAMIC (CONF:1098-31884). This code MAY contain zero or more [0..] translation, which SHALL be selected from CodeSystem NDC urn:oid:2.16.840.1.113883.6.69.

      BindingThe codes SHOULD be taken from Clinical Substance .
      (preferred to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.2)
      20. ManufacturedProduct.manufacturerOrganization
      Comments

      MAY contain zero or one [0..1] manufacturerOrganization (CONF:1098-7416).

      Guidance on how to interpret the contents of this table can be foundhere

      0. ManufacturedProduct
      Definition

      Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.

      ShortBase for all types and resources
      Control1..1
      Is Modifierfalse
      Logical ContainerClinicalDocument (CDA Class)
      ValidationInstance of this type are validated by templateId
      XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
      Invariantsproduct-choice: manufacturedLabeledDrug and manufacturedMaterial are mutually exclusive (one must be present) ((manufacturedLabeledDrug | manufacturedMaterial).count() = 1)
      2. ManufacturedProduct.nullFlavor
      Definition

      If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

      Control0..1
      BindingThe codes SHALL be taken from CDANullFlavor
      (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
      Typecode(cs: Coded Simple Value)
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      LabelExceptional Value Detail
      4. ManufacturedProduct.realmCode
      Definition

      When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

      Control0..*
      Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
      6. ManufacturedProduct.typeId
      Definition

      When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

      Control0..1
      Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
      InvariantsII-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists())
      8. ManufacturedProduct.typeId.nullFlavor
      Definition

      If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

      Control0..1
      BindingThe codes SHALL be taken from CDANullFlavor
      (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
      Typecode(cs: Coded Simple Value)
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      LabelExceptional Value Detail
      10. ManufacturedProduct.typeId.assigningAuthorityName
      Definition

      A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

      Control0..1
      Typestring(st: Character String)
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      LabelAssigning Authority Name
      12. ManufacturedProduct.typeId.displayable
      Definition

      Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

      Control0..1
      Typeboolean(bl: Boolean)
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      LabelDisplayable
      14. ManufacturedProduct.typeId.root
      Definition

      Identifies the type as an HL7 Registered model

      Control1..1
      Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      LabelRoot
      Fixed Value2.16.840.1.113883.1.3
      16. ManufacturedProduct.typeId.extension
      Definition

      A character string as a unique identifier within the scope of the identifier root.

      Control1..1
      Typestring(st: Character String)
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      LabelExtension
      18. ManufacturedProduct.templateId
      Definition

      When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

      Control1..*
      Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
      SlicingThis element introduces a set of slices on ManufacturedProduct.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ root
      • value @ extension
      • 20. ManufacturedProduct.templateId:med-information
        Slice Namemed-information
        Definition

        When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

        Control1..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
        22. ManufacturedProduct.templateId:med-information.nullFlavor
        Definition

        If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

        Control0..1
        BindingThe codes SHALL be taken from CDANullFlavor
        (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExceptional Value Detail
        24. ManufacturedProduct.templateId:med-information.assigningAuthorityName
        Definition

        A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

        Control0..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelAssigning Authority Name
        26. ManufacturedProduct.templateId:med-information.displayable
        Definition

        Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

        Control0..1
        Typeboolean(bl: Boolean)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelDisplayable
        28. ManufacturedProduct.templateId:med-information.root
        Definition

        A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

        Control1..1
        Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelRoot
        Pattern Value2.16.840.1.113883.10.20.22.4.23
        30. ManufacturedProduct.templateId:med-information.extension
        Definition

        A character string as a unique identifier within the scope of the identifier root.

        Control1..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExtension
        Pattern Value2014-06-09
        32. ManufacturedProduct.classCode
        Comments

        SHALL contain exactly one [1..1] @classCode="MANU" (CodeSystem: HL7RoleClass urn:oid:2.16.840.1.113883.5.110 STATIC) (CONF:1098-7408).

        Control1..1
        BindingThe codes SHALL be taken from RoleClassManufacturedProduct
        (required to http://terminology.hl7.org/ValueSet/v3-RoleClassManufacturedProduct)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        Fixed ValueMANU
        34. ManufacturedProduct.id
        Comments

        MAY contain zero or more [0..*] id (CONF:1098-7410).

        Control0..*
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
        36. ManufacturedProduct.sdtcIdentifiedBy
        Control0..*
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/IdentifiedBy
        XML FormatIn the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameidentifiedBy.
        38. ManufacturedProduct.manufacturedLabeledDrug
        Control0..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/LabeledDrug
        40. ManufacturedProduct.manufacturedMaterial
        ShortA medication should be recorded as a pre-coordinated ingredient + strength + dose form (e.g., “metoprolol 25mg tablet”, “amoxicillin 400mg/5mL suspension”) where possible. This includes RxNorm codes whose Term Type is SCD (semantic clinical drug), SBD (semantic brand drug), GPCK (generic pack), BPCK (brand pack).
        Comments

        SHALL contain exactly one [1..1] manufacturedMaterial (CONF:1098-7411).

        Control1..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/Material
        42. ManufacturedProduct.manufacturedMaterial.nullFlavor
        Definition

        If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

        Control0..1
        BindingThe codes SHALL be taken from CDANullFlavor
        (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExceptional Value Detail
        44. ManufacturedProduct.manufacturedMaterial.realmCode
        Definition

        When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

        Control0..*
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
        46. ManufacturedProduct.manufacturedMaterial.typeId
        Definition

        When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

        Control0..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
        InvariantsII-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists())
        48. ManufacturedProduct.manufacturedMaterial.typeId.nullFlavor
        Definition

        If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

        Control0..1
        BindingThe codes SHALL be taken from CDANullFlavor
        (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExceptional Value Detail
        50. ManufacturedProduct.manufacturedMaterial.typeId.assigningAuthorityName
        Definition

        A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

        Control0..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelAssigning Authority Name
        52. ManufacturedProduct.manufacturedMaterial.typeId.displayable
        Definition

        Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

        Control0..1
        Typeboolean(bl: Boolean)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelDisplayable
        54. ManufacturedProduct.manufacturedMaterial.typeId.root
        Definition

        Identifies the type as an HL7 Registered model

        Control1..1
        Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelRoot
        Fixed Value2.16.840.1.113883.1.3
        56. ManufacturedProduct.manufacturedMaterial.typeId.extension
        Definition

        A character string as a unique identifier within the scope of the identifier root.

        Control1..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExtension
        58. ManufacturedProduct.manufacturedMaterial.templateId
        Definition

        When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

        Control0..*
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
        60. ManufacturedProduct.manufacturedMaterial.classCode
        Control0..1
        BindingThe codes SHALL be taken from EntityClassManufacturedMaterial
        (required to http://terminology.hl7.org/ValueSet/v3-EntityClassManufacturedMaterial)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        Fixed ValueMMAT
        62. ManufacturedProduct.manufacturedMaterial.determinerCode
        Control0..1
        BindingThe codes SHALL be taken from EntityDeterminerDetermined
        (required to http://terminology.hl7.org/ValueSet/v3-EntityDeterminerDetermined)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        Fixed ValueKIND
        64. ManufacturedProduct.manufacturedMaterial.code
        Comments

        This manufacturedMaterial SHALL contain exactly one [1..1] code, which SHALL be selected from ValueSet Medication Clinical Drug urn:oid:2.16.840.1.113762.1.4.1010.4 DYNAMIC (CONF:1098-7412).

        Control1..1
        BindingThe codes SHALL be taken from Medication Clinical Drug .
        (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.4)
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
        66. ManufacturedProduct.manufacturedMaterial.code.nullFlavor
        Definition

        If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

        Control0..1
        BindingThe codes SHALL be taken from CDANullFlavor
        (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExceptional Value Detail
        68. ManufacturedProduct.manufacturedMaterial.code.code
        Definition

        The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

        Control0..1
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode
        70. ManufacturedProduct.manufacturedMaterial.code.codeSystem
        Definition

        Specifies the code system that defines the code.

        Control0..1
        Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode System
        72. ManufacturedProduct.manufacturedMaterial.code.codeSystemName
        Definition

        The common name of the coding system.

        Control0..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode System Name
        74. ManufacturedProduct.manufacturedMaterial.code.codeSystemVersion
        Definition

        If applicable, a version descriptor defined specifically for the given code system.

        Control0..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode System Version
        76. ManufacturedProduct.manufacturedMaterial.code.displayName
        Definition

        A name or title for the code, under which the sending system shows the code value to its users.

        Control0..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelDisplay Name
        78. ManufacturedProduct.manufacturedMaterial.code.sdtcValueSet
        Definition

        The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

        Control0..1
        Typestring(oid: ISO Object Identifier)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet.
        80. ManufacturedProduct.manufacturedMaterial.code.sdtcValueSetVersion
        Definition

        The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

        Control0..1
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion.
        82. ManufacturedProduct.manufacturedMaterial.code.originalText
        Definition

        The text or phrase used as the basis for the coding.

        Control0..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
        LabelOriginal Text
        84. ManufacturedProduct.manufacturedMaterial.code.qualifier
        Definition

        Specifies additional codes that increase the specificity of the the primary code.

        Control0..0
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
        LabelQualifier
        86. ManufacturedProduct.manufacturedMaterial.code.translation
        Definition

        A set of other concept descriptors that translate this concept descriptor into other code systems.

        ShortTranslations may also be sent with NDC codes (Codesystem urn:oid:2.16.840.1.113883.6.69).
        Comments

        This code MAY contain zero or more [0..] translation, which SHALL be selected from ValueSet Clinical Substance urn:oid:2.16.840.1.113762.1.4.1010.2 DYNAMIC (CONF:1098-31884). This code MAY contain zero or more [0..] translation, which SHALL be selected from CodeSystem NDC urn:oid:2.16.840.1.113883.6.69.

        Control0..*
        BindingThe codes SHOULD be taken from Clinical Substance .
        (preferred to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.2)
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
        XML FormatThe type of this property is determined using the xsi:typeattribute.
        LabelTranslation
        88. ManufacturedProduct.manufacturedMaterial.name
        Control0..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/EN
        90. ManufacturedProduct.manufacturedMaterial.lotNumberText
        Control0..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/ST
        92. ManufacturedProduct.manufacturerOrganization
        Comments

        MAY contain zero or one [0..1] manufacturerOrganization (CONF:1098-7416).

        Control0..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/Organization